by Admin | Dec 17, 2015 | Manufacturing, Randy's Corner |
Lifters are a hot topic in injection molding, and Randy is working hard to address many of the major issues being brought up. In this recent article on MoldMakingTechnology.com, he identifies many of the issues with lifters and also explains why lifters are used,...
by Admin | Dec 17, 2015 | Manufacturing, Randy's Corner |
Lifters are a hot topic in injection molding, and Randy is working hard to address many of the major issues being brought up. In this recent article on MoldMakingTechnology.com, he identifies many of the issues with lifters and also explains why lifters are used,...
by Admin | Dec 2, 2015 | Manufacturing, Randy's Corner, Recent Posts |
There are many variables and impacts that lifters can have on your molding process and final parts. Randy Kerkstra recently published an article at the Plastics Technology site (ptonline.com) that went into more detail on lifters and was a continuation of his...
by Admin | Nov 19, 2015 | Plastics, Randy's Corner, Recent Posts |
Using Hydraulic Driven Slides In Injection Molding With the increasing complexity of molds and the parts that they produce, injection molders are forced to maximize the productivity of each tool. In his continuing discussion on hydraulics over on the...
by Admin | Nov 11, 2015 | Manufacturing, Plastics, Randy's Corner |
Randy’s latest series on ptonline.com addresses the challenges that many shops face with lifters. Having managed thousands of repairs and preventative maintenance activities every year, he has seen many of the issues and challenges that molding operations...
by Admin | Nov 4, 2015 | Manufacturing, Randy's Corner |
Hydraulics and efficient molding go hand in hand. In this recent article on MoldMakingTechnology.com, Randy explains when a self locking cylinder is an attractive and effective option. The basic message is that a locking cylinder is a good option when there is not...
