0 Items


Our industrial strength stain removers and high performance mold cleaners have been chemically formulated to target the unique challenges of the injection mold industry.

Rust Preventatives

Moisture displacing chemistry provides a guard for your mold that will not allow corrosion to penetrate.

Mold Releases

Our innovative quick drying formula bonds to metal surfaces allowing for longer periods of time between applications and less down time.


Our lubricating grease products provide excellent corrosion resistance while eliminating part rejection from pin push marks, streaking and dragging.


Cutting edge Nanotechnology Coatings eliminate the need for spray mold releases reducing mold pressure and fill times.

NSF Listed Products

Our family of NSF listed products are independently approved for use in food grade or medical operations. Safe-T-Clean, Safe-T-Clean and Cera Lube clean, protect and lubricate your mold safely.​

Out with the old and in with the NEW!

Nanoplas is a fast-growing, innovative developer of products that improve the way customers use maintenance products. The market of mold maintenance products is mature and slow to change. Most customers have used the same products for years, because no one has brought new technology to them. Well, that time has changed.

Give it a try, we think you’ll be convinced!

Monthly Featured Product

This month Nanoplas is featuring Nano Mold Coating, our high performance coating product. Click to learn more!

Free Product Sample

Are you curious about our products? Request a free sample.

Nanoplas Products Video

Watch to see what you get with Nanoplas Cleaners, Greases, Rust Preventatives, Mold Releases and Coatings.

What Our Customers are Saying...


We have been using heat cured NANO mold coating for around ten years. We built a mold in 2007 for a very large part made of a glass filled polycarbonate, with a foaming agent, and could only produce around 15 parts before the mold began to pick up material on the sidewalls. After exhausting all of our usual tricks, I remembered my PCS salesman had been recommending NANO coating for problem molds, and reduced cycle times.

When it arrived, and we read the directions for use, we thought it was laughable. “There’s no way”, “snake oil” were some of the comments I heard. After applying it according to the directions, we were quite surprised. The mold has run all these years, and usually it requires cleaning/maintenance and re-coating after around 8-10 thousand parts.

Lynn H.