Coatings

HCF Heat Cure FDA Compliant

HCF™ Heat Cure FDA Compliant is a scientifically formulated coating that uses nanotechnology to create a semi-permanent barrier on the surface of a mold which is only 100 nanometers in thickness and which facilitates extraordinary plastic or rubber part release. HCF coating can be used where food or medical applications are needed, and is designed to be applied when the mold is out of the press.

FEATURES

  • Excellent Release
  • Softer than HC resulting in faster wear for harder or filled materials
  • Thermoplastics
  • Commodity Grades
  • Engineering Grades
  • Cure time 3-4 hours
  • Cured with hot air
  • Application on an unheated surface
  • Application best when not in the press and on an unheated mold
  • Limited ability to bond to plated or pretreated surfaces
  • Multiple coats are possible
  • Solvent Carrier
  • Polymer Film
  • Up to 500K Cycles
  • Temperatures up to 1000°F

Download HCF™ Safety Data Sheet


ORDERING INFORMATION 
NANO10HCF – 10 ml kit 
NANO15HCF – 15 ml kit 
NANO25HCF – 25 ml kit 
NANO50HCF – 50 ml kit 

Kits include:

  • NanoMoldCoating
  • MoldCoatingRemover
  • MicroFiber Cloths
  • MicroFiber Swabs
  • dropper
  • pump sprayer