Cleaners/Degreasers

Injection Mold Cleaners & Degreasers

The Nanoplas line of mold cleaners and degreasers were designed to clean the way professionals like you need them to clean: Quickly, thoroughly, and without residue. With superior cleaning agents to cut through tough buildup, a powerful direct-spray pattern to break up stubborn contaminants, and quick evaporation to help reduce the chance of grease breakdown or residue, our Power Clean™, Mold Brite™, and Safe-T-Clean™ are the answer. Our design allows users to spray at virtually any angle to get those hard-to-reach places, and doesn’t run out of propellant with product still in the can.

 

Mold Brite™

Mold Brite’s™ quickly evaporating chemistry pulls residue, oils, dirt, and grit from the pores of the metal, and eliminates bleeding these contaminants into hard-to-reach areas of the mold.

Clean-N-Run™

Clean-N-Run™ is a powerful cleaning formula that removes contaminants down to the virgin metal. Superior, non-chlorinated, cleaning agents allow for streak-free cleaning on warm molds. Controlled evaporation gives users more cleaning time in the press and in the tool room.

Power Clean™

Power Clean’s™ grime breaking formula is the strongest cleaner available in the industry. Its proven chemistry is able to clean thoroughly and quickly, leaving the mold surface completely clean without wiping.

NSF Safe T Clean All Purpose Cleaner and Degreaser

Safe-T-Clean™

Safe-T-Clean™ is a NSF P-1 listed, high-performance cleaner/degreaser. It has superior cleaning power when compared to other products in the non-chlorinated category. The powerful spray pattern helps break up tough buildup and gives you the ability to clean hard-to-reach areas of the mold.

Specialty Cleaners

The Nanoplas line of specialty cleaners covers a range of applications, from general maintenance to unique applications like gas stain and rust removal. As with all of our products, we listened to our customers’ issues and developed solutions that go where other products haven’t been able to go. Zap-Ox™, Zap-Ox NG™, Nano Mold Cleaner™, and Kleen-All™ are designed to make the mold or general cleaning process move faster and more efficiently. Read how each of these products can help your operation reduce costs and save time.

NSF Zap-Ox The Ultimate Stain Remover

Zap-Ox™

Zap-Ox removes rust, oxidation, build-up, weld discoloration, and other stains without etching the surface. It is also NSF Listed for medical-grade and food-grade applications.

NSF Zap-Ox NG The Ultimate Stain Remover

Zap-Ox NG™

Zap-Ox NG™ possesses all the cleaning power of Zap-Ox but is a non-grit formula. It is specifically designed for use on polished and textured surfaces.

Kleen-All™

Kleen-All™ is a water-based, all-purpose foaming cleaner and degreaser. This industrial strength foam cleaner attacks and dissolves grease, oil, and grime on a variety of surfaces ranging from metal to plastic.

Nano Mold Cleaner™

Nano Mold Cleaner™ is a high-performance universal cleaner/degreaser. It’s non-toxic, non-flammable, and safe to use.