HCF™ Heat Cure
FDA Compliant
Heat Cure HCF™ is a mold release coating and is designed to be used in plastic molding applications per FDA 21 CFR section 175.300 Resinous and Polymeric Coatings. It is NSF certified as a Nonfood Compound as category M1 mold release agent. This FDA Compliant coating is scientifically formulated using polymer technology to create a semi-permanent barrier on the surface of a mold which is only 100 nanometers in thickness and which facilitates extraordinary plastic or rubber part release. Heat Cure HCF is a two-part mixture that is applied in the tool room. Heat and air flow activate the polymerization then the coating must be given at least 3 hours to cure.
FEATURES
- Excellent Release
- Softer than HC resulting in faster wear for harder or filled materials
- Thermoplastics
- Commodity Grades
- Engineering Grades
- Cure time 3-4 hours
- Cured with hot air
- Application on an unheated surface
- Application best when not in the press and on an unheated mold
- Limited ability to bond to plated or pretreated surfaces
- Multiple coats are possible
- Solvent Carrier
- Polymer Film
- Up to 500K Cycles
- Temperatures up to 1000°F
![HCF™ Heat Cure Coating Kit - NSF HCF™ Heat Cure Coating Kit - NSF](https://nanomoldcoating.com/wp-content/uploads/2024/04/Untitled-design-70.png)
Ordering Information
NANO10HCF – 10 ml kit
$395.00Add to cart
NANO15HCF – 15 ml kit
$585.00Add to cart
NANO25HCF – 25 ml kit
$890.00Add to cart
NANO50HCF – 50 ml kit
$1,400.00Add to cart
Kits include:
- NanoMoldCoating
- MoldCoatingRemover
- MicroFiber Cloths
- MicroFiber Swabs
- dropper
- pump sprayer