HCF™ Heat Cure FDA Compliant

Heat Cure HCF™

NSF-Listed M1

Heat Cure HCF™  is an FDA-Compliant mold release coating and is designed to be used in plastic molding applications per FDA 21 CFR section 175.300 Resinous and Polymeric Coatings. It is NSF certified as a Nonfood Compound as category M1 mold release agent.  This FDA-compliant coating is scientifically formulated using polymer technology to create a semi-permanent barrier on the surface of a mold which is only 100 nanometers in thickness and which facilitates extraordinary plastic or rubber part release. Heat Cure HCF is a two-part mixture that is applied in the tool room. Heat and air flow activate the polymerization then the coating must be given at least 3 hours to cure.

FEATURES

• Excellent Release
• Softer than HC resulting in faster wear for harder or filled materials
• Thermoplastics
• Commodity Grades
• Engineering Grades
• Cure time 3-4 hours
• Cured with hot air
• Application on an unheated surface
• Application best when not in the press and on an unheated mold
• Limited ability to bond to plated or pretreated surfaces
• Multiple coats are possible
• Solvent Carrier
• Polymer Film
• Up to 500K Cycles
• Temperatures up to 1000°F