Injection Mold Cleaners & Degreasers
The Nanoplas line of mold cleaners and degreasers were designed to clean the way professionals like you need them to clean: Quickly, thoroughly, and without residue. With superior cleaning agents to cut through tough buildup, a powerful direct-spray pattern to break up stubborn contaminants, and quick evaporation to help reduce the chance of grease breakdown or residue, our Mold Brite™, and Safe-T-Clean™ are the answer. Our design allows users to spray at virtually any angle to get those hard-to-reach places, and doesn’t run out of propellant with product still in the can.
Mold Brite™
Mold Brite’s™ quickly evaporating chemistry pulls residue, oils, dirt, and grit from the pores of the metal, and eliminates bleeding these contaminants into hard-to-reach areas of the mold.
Clean-N-Run™
Clean-N-Run™ is a powerful cleaning formula that removes contaminants down to the virgin metal. Superior, non-chlorinated, cleaning agents allow for streak-free cleaning on warm molds. Controlled evaporation gives users more cleaning time in the press and in the tool room.
Safe-T-Clean™
Safe-T-Clean™ is a NSF P1 listed, high-performance cleaner/degreaser. It has superior cleaning power when compared to other products in the non-chlorinated category. The powerful spray pattern helps break up tough buildup and gives you the ability to clean hard-to-reach areas of the mold.
Power Clean™
Discontinued
While Power Clean has been discontinued, we have other comparable cleaners available. These cleaners also break up the grime, lift plastics, oils, and greases from the pores of the metal instantly. Contact us for help finding a suitable alternative for your application or request a free sample of others now.
Specialty Cleaners
The Nanoplas line of specialty cleaners covers a range of applications, from general maintenance to unique applications like gas stain and rust removal. As with all of our products, we listened to our customers’ issues and developed solutions that go where other products haven’t been able to go. Zap-Ox™, Nano Mold Cleaner™, and Kleen-All™ are designed to make the mold or general cleaning process move faster and more efficiently. Read how each of these products can help your operation reduce costs and save time.
Zap-Ox®
Zap-Ox® removes rust, oxidation, build-up, weld discoloration, and other stains without etching the surface. It is also NSF Listed C1 for medical-grade and food-grade applications.
Zap-Ox NG™
Sorry, Zap-Ox NG™️ is no longer available.
Kleen-All™
Kleen-All™ is a water-based, all-purpose foaming cleaner and degreaser. This industrial strength foam cleaner attacks and dissolves grease, oil, and grime on a variety of surfaces ranging from metal to plastic.
Nano Mold Cleaner™
Nano Mold Cleaner™ is a high-performance universal cleaner/degreaser. It’s non-toxic, non-flammable, and safe to use.
Performance Outcomes for Professional Mold Maintenance
- Faster Turnarounds: Quick-evaporating formulations shorten clean-in-press cycles and reduce downtime between runs.
- Deeper Pore Cleaning: Chemistries designed to pull residues and oils from metal pores.
- Consistent Finishes: Streak-free cleaning on warm molds maintains part quality and reduces post-processing.
- Reduced Rework: Thorough contaminant removal lowers defect rates tied to gas stains, oxidation, and surface grime.
How To Choose the Right Cleaner for Your Scenario
- Warm Mold Cleaning: Choose Clean-N-Run™ for streak-free results and controlled evaporation when the tool is at temperature.
- Residue And Oil Pull-Out: Use Mold Brite™ for rapid evaporation and deep pore extraction to prevent bleed-out.
- General And NSF-Listed Use: Pick Safe-T-Clean™ for high-performance cleaning in environments that require NSF P1 listing.
- Stain And Oxidation Removal: Apply Zap-Ox® to target rust, weld discoloration, and oxidation without etching surfaces.
- Multi-Surface Shop Cleaning: Go with Kleen-All™ for foaming action on metal, plastics, and general industrial surfaces.
Compatibility and Application Best Practices
- Metals: Works on tool steels and hardened alloys; test on treated or coated surfaces to confirm no finish disruption.
- Surface Temperature: For warm molds, use controlled-evaporation products to maximize contact time and cleaning efficiency.
- Spray Access: Direct-spray designs enable cleaning at virtually any angle, reaching vents, lifters, and undercuts without propellant loss.
- Residue Control: Quick evaporation helps limit breakdown of greases and reduces post-clean residue that can affect part release.
Troubleshooting Common Mold Contamination Issues
- Recurring Bleed-Out: Use a deep-pore cleaner (e.g., Mold Brite™), increase contact time, and re-clean after short production runs.
- Streaking On Warm Tools: Switch to Clean-N-Run™ for controlled evaporation to wipe clean.
- Gas Stains and Weld Discoloration: Spot-treat with Zap-Ox®; neutralize and rinse per instructions to avoid residue.
- Grease Breakdown/Residue: Prefer quick-evaporation formulations and re-lube with compatible mold grease after cleaning.
FAQ
What Makes Nanoplas Cleaners Different from General Degreasers?
Purpose-built formulations for injection molds combine deep pore cleaning, quick evaporation, and angle-friendly spray patterns that reach tight geometry.
Which Cleaner Should I Use on Warm Molds?
Clean-N-Run™ is designed for warm tool cleaning with controlled evaporation and streak-free performance.
Will These Products Leave Residue or Affect Part Release?
Quick-evaporating, non-chlorinated chemistries minimize residue.
Can I Use These Cleaners in Compliance-Sensitive Environments?
Safe-T-Clean™ and Zap-Ox® support applications requiring NSF listings; confirm specifics with your facility’s SOPs and the product SDS.