Bleeding in Injection Molding
Bleeding in injection molding is defined as undesired movement of materials within a mold or molded part. In most instances, bleeding leads to an increase in scrap and rejects, plus downtime, none of which are good for plastic injection molders.
The good news is that with the right Nanoplas product, you can mitigate bleeding. See below for the most common causes and our proven solutions.
Higher temperatures can cause grease to break down and liquify. When this happens, grease can migrate and turn tacky, causing build-up in troublesome areas or contaminating parts.
Over Applying Rust Preventative
When a rust preventative is over-applied, it can cause grease to break down in certain areas of the mold, leading to bleeding. If it’s breaking down and bleeding around ejector pins, your parts will likely be contaminated. If the grease breaks down on the slides and lifters, it could become tacky, causing them to seize, or it’ll bleed completely out, causing you to run metal-on-metal, wreaking havoc on your mold.
As a truly dry rust preventative, Mold Guard won’t break down grease. It can also be molded through at startup, so you can get your mold up and running faster.
Request a Free Sample
Over Applying Grease
Over applying grease, especially on ejectors pins, can lead to part contamination. You may also find grease seeping out of ejector pin holes, slowly migrating to the part or other areas of the mold cavity that may come in contact with the finished goods being produced. This can lead to scrap or buildup in troublesome areas of the mold.
A very thin application of Cera-Lube is enough lubrication for traditional molding operations, because this product remains on the surface longer, so there’s no need to over-apply. In fact, it extends production up to ten times longer compared to that of standard greases.
Request a Free Sample
When used in tandem, Nanoplas products can help you significantly reduce costs, downtime, scrap, and more. Scientifically formulated, each product is individually effective, so when used together, they enhance mold performance significantly.
2300% Increase in Run Capacity with SYN-LUBE
See Case Study
SYN-LUBE is lasting weekly, as opposed to daily. Run capacity has increased from 1,000-1,500 parts to 24,000 parts before having to reapply.”