With the increasing complexity of molds and the parts that they produce, injection molders are forced to maximize the productivity of each tool. In his continuing discussion on hydraulics over on the moldmakingtechnology.com site, Randy discusses Hydraulic Driven Slides. (more…)
Randy’s latest series on ptonline.com addresses the challenges that many shops face with lifters. Having managed thousands of repairs and preventative maintenance activities every year, he has seen many of the issues and challenges that molding operations encounter on a regular basis. (more…)
Hydraulics and efficient molding go hand in hand. In this recent article on MoldMakingTechnology.com, Randy explains when a self locking cylinder is an attractive and effective option.
The basic message is that a locking cylinder is a good option when there is not sufficient space for the required bore size. This option helps prevent blow back via a mechanical lock on set position that will lock the hydraulic piston. (more…)
Designing the tool based on the material to be used is one way that Randy has been able to enlarge his process window, reducing the risk of quality issues.
In this article, he addresses many of the considerations and gives real examples with real materials and real situations that happen in shops every day.
You can read the full article on PTonline.com here: Tooling: Designing the Tool for the Material
The Nanoplas family of products can help your injection mold operation address many manufacturing and productivity challenges. Our nano-technology really can make a difference. Check out our line of Injection Mold Coatings, Degreasers and Maintenance Products!
Hydraulics are a very important element of successful and effective tooling, and Randy continues his hydraulics focused article series on moldmakingtechnology.com.
This article discusses the importance of having enough pressure or a cylinder that is rated to provide enough pressure based on the needs of the mold.
Randy does a nice job of explaining the concept and also provides a few things to consider when it comes to the cylinder ratings. You can read the entire article here: The Designer’s Edge: Avoiding Cylinder Failure
